We engineer rotating tilt buckets around a simple principle: in a tight trench or against a wall, the bucket should move - not the machine. Our Rotating Tilt Bucket combines 360° continuous rotation with left-right tilt in one shell, connecting to the excavator's auxiliary hydraulic circuit so the operator can shape slopes, trim ditches and level backfill from a single parked position.
What this means on site is straightforward. A standard bucket digs vertically; a tilt-only bucket angles left and right. This one does both, and also spins a full circle - so you can cut the far wall of a trench without swinging the carrier, finish both sides of a slope from one spot, and backfill without driving the machine back and forth. Less repositioning means less fuel burned and fewer hours on the undercarriage.
How It Works
Setting up and operating this Rotating Tilt Bucket is straightforward.
- Mounts to the arm via standard pin-on or quick-coupler brackets.
- Connects to the excavator's existing auxiliary hydraulic circuit - the same lines used for a breaker or thumbs.
- Joystick controls both functions: push left/right for tilt, rotate the control for 360° spin.
Product Options & Customization
The Rotating Tilt Bucket comes in three sizes, matched to your carrier class and flow rate.
- The smallest size suits compact excavators used on residential and tight-site grading.
- The mid-size covers most general-purpose carriers - the one most contractors start with.
- The largest size pairs with heavier machines running higher hydraulic flow, where rotation speed under load matters.
If you are unsure which size matches your excavator, send us the machine model and we will confirm the fit before you order. Bucket width and pin-on dimensions can also be adjusted to match your existing coupler setup.
Technical Specifications
The table below summarizes the Rotating Tilt Bucket across all three models.
|
|
SL04 |
SL06 |
SL08 |
|
Excavator Class (t) |
5–9 |
10–17 |
18–25 |
|
Rotation Angle |
360° continuous |
360° continuous |
360° continuous |
|
Tilt Angle |
±40° |
±40°–45° |
±45° |
|
Required Flow (L/min) |
40–70 |
80–130 |
140–200 |
|
Working Pressure (Bar) |
210–250 |
250–320 |
280–350 |
Hot Tags: rotating tilt bucket, China rotating tilt bucket manufacturers, suppliers, factory, 4 in 1 bucket for compact tractor, backhoe screening bucket, Excavator Mixing Bucket, excavator tilt, hydraulic tilting excavator bucket, tilt and rotate excavator bucket












