Hydraulic Clamshell Bucket for Excavator
video
Hydraulic Clamshell Bucket for Excavator

Hydraulic Clamshell Bucket for Excavator

We manufacture clamshell buckets for excavator operators who move loose bulk material without spilling it. Our Hydraulic Clamshell Bucket uses two curved shells that open to dig in, then close into a sealed compartment to hold sand, silt, gravel or grain through the lift — no spillage during swing, no material left in the trench.
Send Inquiry
Description

We manufacture clamshell buckets for excavator operators who move loose bulk material without spilling it. Our Hydraulic Clamshell Bucket uses two curved shells that open to dig in, then close into a sealed compartment to hold sand, silt, gravel or grain through the lift - no spillage during swing, no material left in the trench.


The sealed shell is what solves the problem. A standard bucket leaves loose material spilling over the sides on every swing, especially with wet silt or fine sand. The clamshell design encloses the load completely, so the operator can dig, lift and dump in one motion - and because the shells close underwater, the same bucket works for dredging and river cleaning without modification.

 

Key Features

What changes on a bulk-loading day.

01/

Sealed shell when closed. Two curved shells enclose the load completely, stopping sand, silt and fine material from spilling during transport.

02/

Underwater operation. The sealed design works below water level, for dredging and riverbed cleaning.

03/

Grab, lift, dump in one cycle. Open to dig in, close to lift, open to dump - no separate handling.

04/

Tight trench access. The narrow profile fits into foundation pits and narrow excavations where a wide bucket cannot reach.

 

Applications

This Hydraulic Clamshell Bucket is used across four bulk-handling scenarios.

 

Dock and port loading

Loading sand, gravel and bulk cargo from ships or stockpiles.

 
 

River dredging and cleaning

Removing silt and sediment from riverbeds and waterways.

 
 

Foundation pits and trenching

Digging and removing spoil from narrow excavations.

 
 

Grain and mineral handling

Moving grain, mineral powder and other fine loose bulk.

 

 

Technical Specifications

 

The table below covers the Hydraulic Clamshell Bucket across three carrier classes.

 

 

SL04

SL06

SL08

Excavator Class (t)

5–9

10–17

18–25

Required Flow (L/min)

40–70

60–100

80–130

Working Pressure (Bar)

210–240

210–240

210–240

 

Hot Tags: hydraulic clamshell bucket for excavator, China hydraulic clamshell bucket for excavator manufacturers, suppliers, factory, 5t excavator tilt bucket, backhoe screening bucket, Excavator Mixing Bucket, Hydraulic rotary clamshell bucket, standard bucket, tilt bucket for excavator

Send Inquiry

(0/10)

clearall