We manufacture hydraulic quick hitches for excavator operators who switch attachments more than once a day. Our Hydraulic Quick Hitch locks and releases attachments from the cab - one lever, no stepping out, no hammering pins - so the operator moves from bucket to breaker to grapple without breaking the working rhythm.
The hitch is built around two safety details that matter on a daily basis. The large hook opening wraps the carrier pin over a wide area, spreading the load and resisting deformation under repeated impact. The safety pin itself is oversized - a mechanical backup that engages even if hydraulic pressure drops, so the attachment cannot release unexpectedly mid-cycle.
Key Features
Three design points operators notice in the first week.
Cab-operated locking
A hydraulic cylinder engages and releases the locking mechanism, controlled from the seat - no one leaves the cab during an attachment change.
Large hook opening
The pin wraps over a wide area, distributing the load and preventing deformation under shock and vibration.
Oversized safety pin
A mechanical backup that holds even if hydraulic pressure is lost - the attachment stays locked regardless of system state.
Applications
This Hydraulic Quick Hitch is specified for contractors who run the same excavator across multiple jobs in a single day.
Demolition and excavation
Bucket to breaker and back, several times per shift.
Landscaping and site prep
Switching between bucket, grapple and ripper without stopping work.
Utility and trench work
Trenching, pipe laying and backfilling on the same carrier.
Technical Specifications
The table below covers the Hydraulic Quick Hitch across six model sizes, matched to excavators from one-ton up to forty-ton class.
|
SLKL02 |
SLKL04 |
SLKL06 |
SLKL08 |
SLKL10 |
SLKL17 |
|
|
Excavator Class (t) |
1–4 |
5–8 |
10–15 |
18–25 |
26–30 |
30–40 |
|
Weight (kg) |
550–600 |
750–850 |
900–1000 |
1100–1300 |
1100–1300 |
1100–1301 |
|
Length (mm) |
388 |
600 |
765 |
924–944 |
983–1050 |
1006–1473 |
|
Height (mm) |
246 |
310 |
388 |
492 |
574 |
558–610 |
|
Width (mm) |
175 |
270 |
353–436 |
449–483 |
543–568 |
606–663 |
|
Pin-to-Pin Distance (mm) |
80–150 |
290–360 |
380–420 |
460–480 |
473–540 |
550–620 |
|
Forearm Pin Width (mm) |
80–140 |
180–200 |
232–315 |
306–340 |
375–411 |
416–469 |
|
Top-to-Bottom Pin Distance (mm) |
159 |
195 |
220 |
275 |
300 |
360 |
|
Pin Diameter (mm) |
25–40 |
50–55 |
60–70 |
70–80 |
80–90 |
120 |
|
Working Pressure (Bar) |
32–40 |
32–40 |
32–40 |
32–40 |
32–40 |
32–40 |
|
Required Flow (L/min) |
10–20 |
10–20 |
10–20 |
10–20 |
10–20 |
10–20 |
Hot Tags: hydraulic quick hitch, China hydraulic quick hitch manufacturers, suppliers, factory, faster hydraulic quick coupler, hydraulic quick disconnect coupling, manual quick coupler, Mechanical Quick Change Hitch, quick hitch













